xTool Fire Safety Set: Auto Fire Detection, Fire Extinguishing, Keep Peace of Mind to Engrave

• Peace of Mind: Auto flame detection, auto flame extinguishing protect your safety and peace of mind
• Double Flame Extinguishing Mode: Support auto flame extinguishing and manual control. Press the flame extinguishing button to manually extinguish the flame
• Wide Compatibility: Compatible with all 455nm blue diode laser or CO2 laser machines in a 0.13m³ enclosed space. The open-frame machine requires use with an enclosure so the safety set can extinguish the flame effectively
• Easy to Install: Detailed installation guide, easy-to-install safety set, and easy to replace the gas bottle. The gas bottle is consumable; please replace it after it releases gas
• Note: If the set detects the flame that may cause damage to your machine, it will spray the CO2 gas (truly pollution-free & non-toxic). The little flame that won’t cause damage may not trigger flame extinguishing

The Safest Possible Way to Detect & Suppress Fire

• Auto Flame Detection

By using 5 fire detection sensors and integrated
algorithms of light, temperature, and position inside
the enclosed laser, xTool Fire Safety set is sensitive to
any possible dangers of fire.

• Auto Alarm Triggering

Immediately after it detects fire, xTool Fire Safety Set will automatically trigger the alarm, warning users of the fire by continuous “beeping” sounds . You can stop the alarm by pushing a button on it, if you want to deal with the fire in your own way.

• Auto Power Cut

To prevent further exacerbating the burning fire and protect the laser machine from fire, the smart switch of the xTool Fire Safety Set will shut down the working laser automatically in a few seconds after the alarm sounds

Wide Range of Compatibility

• Enclosed Machine

Enclosed machine that has the working space up to 0.13m³ can work with xTool Fire Safety Set. (Be aware that an air tube is needed to put into
the enclosed space for it to work)